Product ID:FLOOR AND TRIM VARNISH, 660
MSDS Date:01/15/1986
FSC:8010
NIIN:00-165-4420
MSDS Number: BHFNB

FARWEST PAINT MANUFACTURING CO.

4522 S. 133RD STREET
TUKWILA, WA 98168
US

Emergency Phone: (206) 941-1619

Info Phone: (206) 244-8844

Cage: 2F266

FARWEST PAINT MANUFACTURING CO

TUKWILA, WA 98168 US

Telephone: 206-244-8844

Cage: 6F266

POLYURETHANE RESIN

Fraction By Weight: 5-11%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

STODDARD SOLVENT

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 25-31%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293

MINERAL SPIRITS

CAS: 8052-41-3

Fraction By Weight: 65-71%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293

METAL SOAP DRIERS

Fraction By Weight: <1%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ASPIRATION OF MATERIAL INTO THE LUNGS
CAN CAUSE CHEMICAL PNEUMONITIS WHICH CAN BE FATAL.
Effects of Overexposure:EYES: CAN CAUSE SEVERE
IRRITATN,REDNESS,TEARG,BLURRED VISION. SKIN: CAN CAUSEMODERATE
IRRITATN,DEFATTG,DERMATITIS. INHALATION: CAN CAUSE
NASAL/RESPIRATORY IRRITATN,DIZZINESS,WEAKNESS,FATIGUE,NAUS
EA,HEADACHE,POSSIBLE UNCONSCIOUSNESS,ASPHYXIATION.. INGESTION:
CAN CAUSE GASTROINTESTINAL IRRITATN,NAUSEA,VOMITING.

First Aid:SKIN:THOROUGHLY WASH AFFECTED AREA W/SOAP & WATER.REMOVE
CONTAMINATED CLOTHG & LAUNDER BEFORE RE-USE. EYES:FLUSH W/LG
AMOUNTS WATER,LIFTG UPPER & LOWER LIDS OCCASIONALLY,GET MED ATTN.
INGESTN:DON' T INDUCE VOMITG.KEEP PERSON WARM & QUIETGET MED ATTN.
INHALATN:MOVE TO FRESH AIR.DIFFICULT BREATHG-ADMINISTER OXYGEN,
STOPPED BREATHG-GIVE ARTIFICIAL RESPIRATN.KEEP PERSON
WARM,QUIET,GET MED ATTN.

Flash Point Method:TCC
Flash Point:100F/37.78C
Lower Limits:1.0
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS WITH A FULL
FACEPIECE OPERATED IN PRESSURE- DEMAND OR OTHER POSITIVE PRESSURE
MODE.
Unusual Fire/Explosion Hazard:NEVER USE NEAR OR AROUND WELDERS OR
CUTTING TORCHES. DRUM (EVEN EMPTY) BECAUSE PRODUCT (EVEN JUST
RESIDUE) CAN IGNITE EXPLOSIVELY.

Spill Release Procedures:SM SPILL:ABSORB LIQ ON ABSORBNT MATL,TRF TO
HOOD. LG SPILL:ELIMINATE IGN SOURCES.NEUTRALIZE & DILUTEW/EXCESS
WTR.STOP SPILL @ SOURCE.DIKE SPILL AREA. PUMP LIQ TO SALVAGE
TANK.REMAING LIQ MAY BE TAKEN UP ON ABSORBNT MATL.PREVENT RUNOFF
TO BODIES/WATER

Handling and Storage Precautions:CONTAINERS OF THIS MATERIAL MAY BE
HAZARDOUS WHEN EMPTIED, RETAINING PRODUCT RESIDUES. (VAPOR,LIQUID&
SOLID) OBSERVE ALL HAZARD PRECAUTIONS.
Other Precautions:IF SPILL RUNOFF OCCURS, NOTIFY PROPER AUTHORITIES AS
REQUIRED.

Respiratory Protection:IF TLV EXCEEDED, A NIOSH/MSHA APPROVD
AIR-SUPPLIED RESPIRATR IS ADVISED IN AB- SENCE OF PROPER
ENVIRONMENTAL CONTROL. OSHA REGULATNS ALSO PERMIT OTHER NIOSH/
MSHA RESPIRATRS UNDER SPECIFIED CONDITIO NS.IMPLEMENT
ENGINEERG/ADMIN CONTROLS.
Ventilation:PROVIDE MECHANICAL (GENERAL AND/OR LOCAL EXHAUST) VENTILA-
TION TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:RESISTANT, SUCH AS NITRILE RUBBER
Eye Protection:CHEM SPLASH GOGGLES,OTHER SAFETY GLASSES
Other Protective Equipment:IMPERVIOUS CLOTHING AND BOOTS WILL PREVENT
REPEATED OR PROLONGED SKIN CONTACT.
Work Hygienic Practices:KEEP WORK AREA CLEAN & FREE FROM LEAKS &
SPILLS. WASH HANDSTHOROUGHLY W/SOAP & WATER BEFORE HANDLING FOOD &
DRINK.
Supplemental Safety and Health
NK

HCC:F4
Boiling Pt:B.P. Text:300F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NIL
Appearance and Odor:CLEAR, YELLOW AMBER LIQUID WITH A MILD, SWEET
AROMATIC ODOR
Percent Volatiles by Volume:<68%

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:KEEP AWAY FROM OPEN FLAMES, SPARKS, AND
HEAT. DO NOT WELD NEAR OR AROUND PRODUCT.
Conditions to Avoid Polymerization:KEEP AWAY FROM OPEN FLAMES, SPARKS,
AND HEAT. DO NOT WELD NEAR OR AROUND PRODUCT.

Waste Disposal Methods:DESTROY BY LIQUID INCINERATION. CONTAMINATED
AB- SORBENT MAY BE DEPOSITED IN A LANDFILL IN ACCOR- DANCE WITH
LOCAL, STATE, AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.